Premium wood option · working files

Norse laser files.

Vector files for laser-cutting and engraving wooden versions of the comb, the coins and the raven medallion. They are working files for testing, not a finished product, and none has been burned on a laser yet.

How to use them

  • All files are SVG, in real millimetres. Import at 100%, with no scaling.
  • Red hairline means cut through.
  • Black fill means engrave (burn). Faces come out dark on pale wood.
  • Comb: let the grain run left to right, along the teeth. The gaps between teeth are 1.55 mm, close to a laser’s cut width, so test on scrap first.
  • Medallion back: it is not mirrored. It reads correctly on the back face, so turn the piece over and engrave it as it lies. The border ring sits about 1 mm inside the cut circle, so the piece must not shift between engraving and cutting.
  • Suggested first test: burn the coin test sheet on one piece of maple or basswood scrap and check how clear the fine lettering stays.

Files

Outline of Aud’s comb with fourteen teeth, four of them broken, and a carved handle.Aud’s comb100.7 × 87.8 mm · cut and engraveDownload SVG
Raven in a shield with four geometric ornaments, inside a circle.Medallion, frontØ 50 mm · raven crestDownload SVG
Medallion back with the words Adventure Complete Escape Backpack around a compass.Medallion, backØ 50 mm · lettering, compass, borderDownload SVG
Seven round coin faces in two rows.Coin test sheetAll seven coins · 124 × 62 mmDownload SVG
Common dirham coin face.Common dirhamDownload SVG
Rare dirham coin face.Rare dirhamDownload SVG
Common denier coin face.Common denierDownload SVG
Rare denier coin face with a crown.Rare denierDownload SVG
Hedeby coin face with a ship.Hedeby shipDownload SVG
York penny coin face with a cross.York pennyDownload SVG
Raven penny coin face with a raven.Raven pennyDownload SVG

This page is hidden from search engines. Anyone with the link can open it.